Selective Pallet Rack
The most universal pallet racking system for direct access to every pallet position.
Olathe, Kansas
Pallet Racks & Warehouse Racking in Olathe, KS
Olathe has added distribution and light manufacturing space faster than almost anywhere in Johnson County, and a lot of that space is sitting empty of rack when tenants take possession. If you are searching for pallet racks in Olathe, you are probably trying to get product off the floor before the next inbound trailer arrives. Kansas City Pallet Rack designs and installs warehouse racking for buildings along I-35, K-10, Lone Elm, and Ridgeview, sized around your pallets and your lift equipment. You get a CAD layout with a pallet position count and an itemized quote, usually within days of the first call.
We supply selective pallet racks, push back and drive-in systems, pallet flow, carton flow, and cantilever rack, plus wire decking and rack protection. Design and the layout drawing are free. Call (913) 453-3942 and we can usually tell you on the first call which system fits.
Why Olathe Operations Work With Us
New Olathe buildings tend to have generous clear height, and that is where most operators leave storage on the table. A 32-foot building racked to 20 feet gives away an entire level of pallet positions, and once product is loaded, going back to raise beams is expensive.
We design to the height you have from the start, working under the sprinkler line and around lighting so you capture the vertical space your lease is already paying for.
Manufacturers in Olathe also tend to store raw material and finished goods very differently. We routinely put cantilever along one wall for long stock, drive-in or push back for bulk, and selective bays in the pick zone, all in the same building and all installed as one coordinated project.
Free warehouse needs analysis
CAD layout with your pallet position count
Itemized quote, not a lump sum
Installation managed start to finish
Parts, expansions, and reconfiguration later
Areas We Cover
- Lone Elm industrial
- Ridgeview corridor
- Olathe Industrial Park
- K-10 west
Industries We Serve
- Manufacturing
- Aerospace and electronics
- Distribution
- Automotive parts
How a Pallet Rack Project Runs
Every Olathe project opens with a warehouse needs analysis over the phone. We ask about pallet footprints and weights, forklift type and lift height, clear height under obstructions, SKU count, and how quickly product turns.
Our design team then produces a CAD layout showing rows, aisle widths, beam elevations, and total pallet positions, paired with an itemized quote for frames, beams, wire decking, pallet supports, and rack protection.
Rack selection follows how you actually operate. Wide SKU counts with daily picking point toward selective racking, where every position stays reachable. Deep quantities of the same item favor push back, drive-in, or pallet flow, which convert aisle space into storage and shrink the floor area you need for the same inventory.
After you approve the drawing we order steel, coordinate delivery, and manage the installation. Every bay is anchored, plumbed, leveled, labeled, and capacity-tagged, working in phases so production and shipping continue. We return later for expansions, relocations, and replacement components as your Olathe operation grows.
Talk to someone who has done this before
Our team has designed and installed warehouse racking across the I-35 and K-10 industrial corridor and the wider metro. Call and describe your building; you will get a straight answer, not a brochure.
Call (913) 453-3942Pallet Rack Systems We Supply
Most buildings use two or three of these together. We help you decide which zones need direct access and which can trade selectivity for density.
Push Back Pallet Rack
High-density storage where pallets are loaded from a single aisle.
Drive-In Pallet Rack
High-density storage for large quantities of similar products.
Pallet Flow Rack
First-in, first-out (FIFO) system with gravity-fed lanes.
Cantilever Rack
Open-front design for long, bulky, or irregularly shaped items.
Carton Flow Rack
Hand-picking system with gravity-fed wheel conveyors.
Recent Warehouse Racking Projects
Systems we have designed, delivered, and installed for operations around the metro.
Get a Pallet Rack Quote for Your Warehouse
Send us the basics and we will come back with a layout and a number. No cost, no obligation, and the drawing is yours either way.
What you get back
- A CAD layout with your pallet position count
- An itemized quote broken out by component
- System recommendations for each zone
- A realistic delivery and installation timeline
Pallet Rack Questions We Hear Most
Nearby Cities We Also Serve
Operations here frequently run a second building elsewhere in the metro. We handle both, with matching components so parts move between sites.
Ready to Rack Your Warehouse?
Call (913) 453-3942 or request a quote and we will start on your layout today.